All Issue

2018 Vol.28, Issue 4 Preview Page

Research Article

31 December 2018. pp. 673-686
Abstract
References
1
American Society for Testing Materials(ASTM, D 2938-95), 2005, Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens, Annual Book of ASTM Standards 2005.
2
American Society for Testing Materials(ASTM, D 7012-07e1), 2009, Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures, Annual Book of ASTM Standards 2009.
3
Barton, N. R., 1971, A relationship between joint roughness and joint shear strength, Proc. Int. Symposium on Rock Mechanics, Nancy, France, 1-8.
4
Deere, D. U. and Miller, R. P., 1966, Engineering classification and index properties for intact rock, Air Force Weapons Laboratory Technical Report, AFWL-TR-65-116. Kirtland Base, New Mixico, 300.
5
Goodman, R. E., 1989, Introducticin to Rock Mechanics, John Wiley and Sons, New York, 5, 19-53.
6
Inoue, M. and Ohomi, M., 1981, Relation uniaxial compressive strength and elastic wave velocity of soft rock, Proc. Int. Symposium on Weak Rock, ISRM, Tokyo, 21-24.
7
International Society for Rock Mechanics(ISRM), 1981, Suggested methods for determination of the uniaxial compressive strength of rock materials, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 18(1), 211-213.
8
International Society for Rock Mechanics(ISRM), 1994, Suggested methods for determining Wather Content, Porosity, Density, Absorption and Properties and Swelling and Slake-Durability Index Properties, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 31(5), 547-550.
9
Jun, I.S., 1994, Construction Standard, Construction Researcher, Seoul, 46.
10
Judd, W. and Huber, C., 1961, Correlation of rock properties by statistical method, Int, Symp, Mining Res., Missouri Sch. Mines, Rolla, Mo. 621-648.
11
Kahraman, S., 2001, Evaluation of simple methods for assessing the uniaxial compressive strength of rock, International Journal of Rock Mechanics and Mining Sciences, 38(7), 981-984.
10.1016/S1365-1609(01)00039-9
12
Korea Engineering and Consulting Association, 2004, Ground Survey Construction Standard, 188.
13
Korea Expressway Corporation, 2009, Korean Roadway Design Guidelines, 4(Tunnel), 80.
14
Korea Society for Rock Mechanics and Rock Enginnering, 2005, Standard test method for uniaxial compressive strength of rock, Tunnel & Underground Space, 15(2), 85-86.
15
Lee, J.I., Lee, H.G., Ryu, C.H. and Yang, H.S., 1982, Study on the epidemiological characteristics of major pomegranates distributed in Korea(Chapter1), Journal of the Korean Mining Society, 19(4), 260-267.
16
Lee, S.G. and Lee, S., 1995, "Estimation of Uniaxial Compressive Strength of Korean Granite Using Schmidt Hammer Figures", Journal of the Korean Society of Civil Engineers. 15(1), 199-210.
17
Moradian, Z. A. and Behnia, M., 2009, Predicting the uniaxial compressive strength and static Young's modulus of intact sedimentary rocks using the ultrasonic test. International Journal of Geomechnanic, 9(1), 1-14.
10.1061/(ASCE)1532-3641(2009)9:1(14)
18
Park, H.D., 1995, A Study on the P wave Velocity Measurement Technique for the Measurement of Engineering Anisotropy of Rock, Journal of the Geological Engineering Society, 5(3), 237-247.
19
Press, F., 1966, Seismic velocities, Handbook of physical contants, Ceol. Sic. Am. Memoir, 976.
20
Seoul Metropolitan Government(SMG), 1996, Geotechnical Investigation Handbook, Seoul Metropolitan Government, 14-24.
21
Sharma, P. K. and Singh, T. N., 2008, A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength, Bulletin of Engineering Geology and the Environment, 68(1), 17~22.
10.1007/s10064-007-0109-y
22
Yang, H.S., 1992, Fracture Condition Coefficient of Major Rock in Korea, Journal of the Korea Resources Engineering Society, 29(2), 91-102.
Information
  • Publisher :Korean Society of Engineering Geology
  • Publisher(Ko) :대한지질공학회
  • Journal Title :The Journal of Engineering Geology
  • Journal Title(Ko) :지질공학
  • Volume : 28
  • No :4
  • Pages :673-686
  • Received Date : 2018-11-15
  • Revised Date : 2018-12-07
  • Accepted Date : 2018-12-13