The Journal of Engineering Geology ISSN:1226-5268(Print) 2287-7169(Online) 지질공학

Barton, N., Lien, R., Lunde, J., 1974, Engineering classification of rock masses for the design of tunnel support, Rock Mechanics, 6, 189-236.

Bieniawski, Z.T., 1989, Engineering rock mass classifications, Wiley, 13-19.

Choi, J.M., 2000, Effects of sand seam to estimate of consolidation settlement, Master's Thesis, Chung-Ang University, 49-51 (in Korean with English abstract).

Hoek, E., Bray, J.W., 2003, Rock slope engineering, Spon Press, 134.

ISRM (International Society for Rock Mechanics), 1978, Commission on standardization of laboratory and field tests: Suggested methods for the quantitative description of discontinuities in rock masses, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 15(6), 319-368.

Jung, C.H., 1994, Introduction to geology, Parkyoungsa, 216-241, 585-621.

Kang, D.H., 2020, The effect of the claysimatic shape on the stability of the slope, Master's Thesis, Kyungpook National University, 4-9 (in Korean with English abstract).

KEC (Korea Expressway Corporation), 1996, Road design manual, Part 2. Earthwork and drainage, 40.

KECRI (Korea Expressway Corporation Research Institute), 2000, Decision of design angles of slope due to geological conditions, 8-33, 37-39.

KFSC (Korea Facility Safety Corporation), 2006, Construction slope design standards, 22.

Kim, B.S., 2005, A study on the strength of boundary between rock and soil on various rock types, Master's Thesis, University of Seoul, 4-22 (in Korean with English abstract).

Kim, G.W., 1993, Revaluation of geomechanics classifications of rock masses, Proceedings of the Korean Geotechnical Society Spring '93 National Conference: Geotechnical Engineering and Tunneling Technology, Seoul, 33-40.

Kim, J.H., 2016, Soil improvement and project of Busan Eco-Delta City construction, Proceedings of the 27th Continuous Education of Korean Geotechnical Society, Seoul, 48-59.

Kim, Y.D., 2009, A study on effective stabilization of cut slope composed of sedimentary rock, Master's Thesis, Yeungnam University, 3-22 (in Korean with English abstract).

Lee, D.J., 2007, A study on the point at issue and improvement of cut slope design in sedimentary rock, Master's Thesis, University of Seoul, 4-12 (in Korean with English abstract).

Lee, S.G., Freitas, M.H., 1989, A revision of the description and classification of weathered granite and its application to granites in Korea, Quarterly Journal of Engineering Geology and Hydrogeology, 22(1), 31-48.

Lee, Y.H., Kim, Y.J., Park, J.G., 2000, Engineering charaeteristics of the sedimentary rocks on compressive strength and weathering grade, Journal of the Korean Geotechnical Society, 16(1), 5-17 (in Korean with English abstract).

MOLIT (Ministry of Land, Infrastructure and Transport), 2021, 4th national railway network construction plan, 41-60.

Rocscience Inc., 2001, RocPlane - Planar sliding stability analysis for rock slopes, 1-10.

Seoul Metropolitan City, 2006, Handbook of Seoul city ground survey, 10-11 (in Korean).

Trueman, R., 1988, An evaluation of strata support techniques in dual life gateroads, Ph.D. Thesis, University of Wales, 15-58.

Tsuchiya, T., 1984, Development of NATM design program (design program for a new tunneling method using bolts and shotcrete), Proceedings of the Japan Society of Civil Engineers, 346, 117-123.