A study on Waviness of Large Discontinuity using 3D Laser Scanner

Young Kim; Su-Gon Lee; Chee-Hwan Kim

doi:10.9720/kseg.2017.2.119

All Issue

2017 Vol.27, Issue 2 Next Page

Research Article

A study on Waviness of Large Discontinuity using 3D Laser Scanner 3D Laser Scanner를 이용한 대규모 불연속면의 굴곡도 측정 연구

June 2017. pp. 119-124

PDF XML

Abstract

The waviness of Large Discontinuity rock is the one of important elements that judges the stability of rock slope. When the waviness of large discontinuity is measured in the field, there are many limitations Therefore this research was carried out to measure waviness of large rock discontinuities using 3D laser scanner to supplement this problem. This research established one 3D model that actual X, Y and Z coordinates through the integrated data gained from one that calculates waviness of base lock using CAD program was compared and analyzed to that of disc-clinometer. As its results, the high reliability of results could be recognized as it belongs to mechanical tolerance 1~2^o and the results belong to the measured values of Mean DIP and Mean are all within 1^o. So, the investigation method of waviness of large discontinuity rock face using 3D laser scanner was verified as more prompt, effective and reliable method than conventional direct site measuring method.

Keywords

3D Laser Scanner

Large joint waviness

Investigation of rock joint

Disc-Clinometer. Automatic joint measurement

대규모 불연속면의 굴곡도는 암반의 안정성을 판단하는 중요한 요소 중 하나이다. 그러나, 주로 실시하는 불연속면의 굴곡도 측정시험은 대형암반의 작은 코어를 채취하여 채취한 작은 코어의 굴곡도에 계수를 사용하여 대형 암반의 굴곡도를 환산하고 있다. 이러한 점을 보완하고자 3D Laser Scanner를 사용하여 대규모 불연속면의 굴곡도를 직접 측정하는 방안에 대해 연구를 수행하였다. 본 연구에서는 3D Laser Scanner를 이용하여 실제 X,Y,Z의 좌표를 가지는 3D 모델을 구축하였고, CAD 프로그램을 사용하여 대규모 불연속면의 굴곡도를 산정한 데이터와 현장에서 Disc-Clinometer로 측정한 Data 결과를 비교 분석 하였다. 그 결과 Mean Dip과 Mean I 측정결과 모두 1^o 이내로서 측정 장비의 기계오차 1~2^o 사이에 속 하기 때문에 3D Laser Scanner를 이용한 데이터 취득 및 분석은 기존의 조사법을 보완할 수 있는 효율적이고 신뢰성 있는 조사법이라고 분석되었다.

키워드

3D 레이져 스캐너

대규모 불연속면의 굴곡도

절리면 현장조사

원형 클리노메터

References

Fecker, E. and Rengers, N., 1971, Measurement of large scale roughnesses of rock planes by means of profilograph and geological compass, Rock Fracture, Proc. Of Int. Symp. Rock Mech. Nancy, Vol. I, pp.18.

Jo, H. K., 2010, An Analysis of the Weathering Intensity of Rock Surface using 3D Terrestrial Laser Scanner, Thesis, University of Seoul, pp.1-15. (in Korean with English abstract).

International Society for Rock Mechanics (ISRM), 1978, Suggested Methods for the Quantitavtive Description of Discontinuities, in Rock Caaracterization Testing and Monitoring, Geomechnical, 1, 6-37.

Cynthia, L. I. and Hwang, S. J., 2001, 3D body scanning systems with application to the apparel industry, Journal of Fashion Marketing and Management, 5(2), 120-132.

10.1108/EUM0000000007283

Barton, N. and Bandis, S., 1990, Review of predictive capabilities of JRC- JCS model in engineering practice, Rock Joint, No.4, pp.603-610.

Barton, N. and Choubey, V., 1977, The shear strength of rock joints in theory and practice, Rock Mechanics and Rock Engineering, 10(1-2), 121-140.Goodman, R. E., 1989, “Rock Mechanics Second Edition”, 2ndEd.. Wiley, New York, 5, 164-169.

RIEGL Laser Measurement Systems, 2014, System Configuration Riegl VZ-1000 Menual, Retrieved from www.riegl.com.

Tse, R. and Cruden, D. M., 1979, Estimating joint roughness coefficients, Int. J. Rock Mech. Min. Sci. and Geomech, Abstr. 16, 303-307.

10.1016/0148-9062(79)90241-9

Hencher, S. R. and Richards, L. R., 1989, Laboratory direct shear strength of rock discontinuities at laboratory and field scale, Rock Mechanics and Rock Engineering, 48(3), 883-897.

10.1007/s00603-014-0633-6

Lee, S. G. and Hencher, S. R., 2013, Assessing the stability of a geologically complex slope where storng dykes locally ACT as reinforcement, Rock Mechanics and Rock Engineering, 46, 1339-1351.

10.1007/s00603-013-0372-0

Lee, S. G., Hencher, S., Kim, C. H., Jo, K. H., Woo, J. K., Kang, H. S., Jo, C. S., Huh, I. S., Kim, Y. S., Kang, D. L., Lim, B. M., Kim, H. G., Kim, J. W., Yu, Y. J., Lee, T. H., Kim, K. S., Kim, Y., Pack, S. H., Lee, Y. S., and Yu, J. W., 2016, Academic research service to identify cause of collapse of slope C-1BL Ulsan Innovation City Final Report.

Pack, S. H., Lee, S. G., Lee, B. K., and Kim, C. H., 2015, A study on reliability of joint orientation measurements in rock slope using 3D laser scanner, Tunnel and Underground Space, 25(1), 97-106.

10.7474/TUS.2015.25.1.097

Sin, S. M., 2005, Study on the analysis of discontinuity in the rock-mass by 3D laser scanner, Thesis, Pai Chai University, pp.47-624. (in Korean with English abstract).

Ewan, V. J. and West, G., 1981, Reproducibility of joint orientation measurements in rock, Transport and Road Research Laboratory supplementary report 702, 18P, International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts, Vol. 19, Issue 4, 1982, pp.94.

Kveldsvik, V., Nilsen, B., Einstein, H. H., and Nadim, F., 2008, Alternative approaches for analyses of a 100,000m3 rock slide based on Barton-Bandis shear strength criterion, Landslides, 5, 161-176.

10.1007/s10346-007-0096-x

Rasouli, V. and Harrison, J. P., 2004, A comparison of linear profiling and an in-plane method for the analysis of rock surface geometry, Int. J. Rock Mech. Min Sci, 41(3), 161-176.

10.1016/j.ijrmms.2004.03.03110.1016/j.ijrmms.2003.12.102

Kim, Y., 2016, A Study on Waviness of Large Discontinuity Using 3D Laser Scanner, University Of Seoul, pp.54-76.

Kim, Y. K., 2005, Studies on the characteristics and safety evaluation of rock slope and dam structure by terrestrial laser scanning system, Thesis, Pai Chai University, pp.4-9. (in Korean with English abstract).

Information

Publisher :Korean Society of Engineering Geology
Publisher(Ko) :대한지질공학회
Journal Title :The Journal of Engineering Geology
Journal Title(Ko) :지질공학
Volume : 27
No :2
Pages :119-124
Received Date : 2017-01-30
Revised Date : 2017-06-19
Accepted Date : 2017-06-22
DOI :https://doi.org/10.9720/kseg.2017.2.119

The Journal of Engineering Geology ISSN:1226-5268(Print) 2287-7169(Online) 지질공학

All Issue